2013 Price List

New Hotness: The 2013 Type 3.1 Journeyman Frame Fixture - Available with head tube on right or left. Price includes 2 Dummy Axles & 2-axis Bench Mount Stand - $4,250

Universal Tube Holder - For use with Anvil Frame Fixtures, holds & centers main tube & stays - $275 or $250 if ordered with an Anvil Frame Fixture.

Mobile Stand – Self-leveling design. Double Locking Casters. Bolts Together! Sexy! - $385

Ask about our other options. We can provide your frame fixture configured to meet your needs.

All New Mitering Hotness: 2013 Universal Main Tube Mitering Fixture - No blocks needed & no limits on the shape or sizes of tubes you can miter; even holds tapered tubes & stays! Includes miter phase adapter with dummy mandrels from 1" to 2" OD. - $1,500

New 2013 Seat Stay Mitering Fixture - $900

New 2013 Chain Stay Fixture - $900

Mitering Combo Meal – Buy all three for $3.200 and save $100!

More New Hotness: The 2013 Anvil Fork Fixture – Beyond compare! - $1,050

Brake Boss Guide ("The Notorious B. B. G.") - Includes 2 Dummy Axles - $350

The F.O.G. ("Finger Of God") - Brake Bridge Adapter for the B.B.G. - $250

Buy them together for $550 and save$50!

Lug Vise - includes 1", 1.125", 1.250", 1.330", 1.375", 1.420" & 1.450" sleeves - $325

Even More New Hotness: Post Punk - Adjustable Post Mount Fixture for front & rear installations and 140 to 203mm rotor sizes. - $200

Feng Shui (lSO Rear Disc Brake Tab Fixture) - with Dummy Axle - $100 or without- $75

Phrunt Shui (ISO Front Disc Brake Tab Fixture) - with Dummy Axle - $125 or without - $100

Indexed Dummy Axles: 100, 110x10, 110x14, 120, 130, 135, 135x17.5 offset, 142xM12, 145, 160 & 170mm spacing. Includes SS Fasteners & Cone Washers. - $35 each.

135 or 150mm x 12mm thru-axle – includes all SS hardware. - $100 each.

True Radius Tubing Bender aka "Mr. Bender Bending Rodriguez" – Available in 5/8", 3/4", or 7/8" @ 9.375" & 11.375" Radii- $850

If you don't see it, ask!

"A Good Anvil Does Not Fear The Hammer!"

old Italian proverb that proves how cool we are... but seriously, don't hammer on your Anvil tooling, OK?